Suppliers with verified business licenses
Audited Supplier Desand hydrate cyclone is mainly used in removing sand ,mud from starch slurry, cassava slurry ,potato slurry after crushing.It is widely used in corn starch processing ,cassava starch and cassava flour processing wheat starch processing ,sago processing ,potato starch processing .
Main technical parameters| Model | Material | Capacity(m3/h) | Feed Pressure(MPa) | Sand Removal Rate |
| CSX15-1 | 304 or nylon | 30-40 | 0.2-0.3 | ≥98% |
| CSX15-2 | 304 or nylon | 60-75 | 0.2-0.3 | ≥98% |
| CSX15-3 | 304 or nylon | 105-125 | 0.2-0.3 | ≥98% |
| CSX20-1 | 304 or nylon | 130-150 | 0.2-0.3 | ≥98% |
| CSX20-2 | 304 or nylon | 170-190 | 0.3-0.4 | ≥98% |
| CSX20-3 | 304 or nylon | 230-250 | 0.3-0.4 | ≥98% |
| CSX22.5-1 | 304 or nylon | 300-330 | 0.3-0.4 | ≥98% |
| CSX22.5-2 | 304 or nylon | 440-470 | 0.3-0.4 | ≥98% |
| CSX22.5-3 | 304 or nylon | 590-630 | 0.3-0.4 | ≥98% |
Advantages of desand equipment
1. There are a variety of models, according to the needs of customers to provide the best solution.
2. Using high technology, the removal rate of starch is greater than 98%.
3. Reasonable structure of desand machine, more conducive to water saving.The Working Principle of Desand Machine
Desand equipment is used to desand material based on the theory of centrifugal separation .Because of the water inlet pipe installed on the eccentric position of the cylinder , when water goes into water inlet pipe through cyclone sand , firstly form downward surrounding fluid along the surrounding tangential direction and move down round . Water current turns upward rotation along cylinder axis as reaches a certain part of the cone. Finally water discharges from the water outlet pipe . The sundries fall into bottom conical slag bucket along the cone wall under the force of fluid inertial centrifugal force and gravity . The cone bottom has components to prevent sundries from rising up. The sundries can outflow under the water current effect as long as you open the manual valve when the sundries in the slag bucket reaches a certain extent.
Real application case
There are four steps to making starch
1.Cleaning:To remove the stone sand and from the raw material.
2.Crushing :To destroys the fiber structure and makes the starch particles free.
3.Separator:To removing sand ,mud from starch slurry, degreasing, microslag separation, protein separation, washing and concentration of all kinds of starch and modified starch emulsion.
4.Drying and Packing:To dehydrator the wet starch, sifter and packaged.
Zhengzhou Jinghua company is an engineering and technical company specializing in starch engineering design, equipment manufacturing, engineering installation and debugging, technical personnel training and other work. Has two modern large factory,Can ensure the processing and delivery cycle,engineering and technical personnel more than 30 people, can provide installation services overseas and custom product for you.Our company has undertaken national and provincial scientific research projects.,with more than 30 invention patents, various honor certificate more than 20.Can provide high quality products for you.The chairman of the board is professor wang yanbo, who is mainly engaged in theoretical research on the transformation and utilization of grain resources, teaching, scientific research and engineering design of starch and its deep processing direction, and research and development of modern equipment. He has published 7 scientific works, 6 national standards and 30 academic papers.
Our Factory
Our Workshop
The Key Technology And Equipment Of Potato Raw Whole Powder Processing and Study On Anti-browning Technology And Equipment Of Potato Flour Of Zhengzhou jinghua Industrial Co., LTD Have Obtained The Scientific And Technological Achievement Evaluation Certificate Issued By The Chinese Cereals And Oils Association.
Our Certificate
Zhengzhou jinghua industry co., LTD was invited to participate in 2019 China international potato industry expo. During the exhibition, jinghua company showed its research and development achievements in recent years and met and communicated with new and old customers. Mr. Wang yanbo, chairman of the board of directors, delivered an important speech at the 2019 tuber green processing and comprehensive utilization technology seminar. In this conference, our company won the "ten years brilliant" honorary certificate issued by China international potato fair, which is the recognition of the ten years' work achievements of the jinghua company, and will encourage zhengzhou jinghua industrial co., LTD to forge ahead in the future.
Pre-sale service
1.Introducing detail features and application of the products to customer.
2.Selecting economical and practical machines for customer.
3.Providing operation data of the related machine.
4.Providing means of trial performance for customer.
5.Flow chart and factory designing layout .
Sale service
1.Recommending engineering conditions required for installation of the machine.
2.Communicating the manufacturing progress of machines with customer in time.
3.Project planning and design services.
After-sale service
1.Training of equipment maintenance and operating personally.
2.Installation and commissioning of equipment until everything is functional.
3.One year warranty and providing long-term maintenance service and spare parts.
4.Giving technical support to customer for developing new product.
5.Engineers available to serve machinery overseas.
Packing & Shipping: Customize the wooden case according to the size of the product.
Delivery: 14 days after receiving pre-payment (on time according to contract strictly).
Q1: Is your company a factory or trading company?
A: Our company is a factory in Henan Province ,with export license and we have done export business over 20 years professionally.
Q2.What is your main business?
A: Zhengzhou Jinghua is devoted to starch processing machine. The machine of starch processing line , such as : cassava starch line , cassava flour line , potato starch line , sweet potato line , wheat starch ,sago line and garri line
Q3. Can you customize the products according to our requirements?
A: Yes, we have a professional technical department that can customize the products according to your requirements
Q4: Are your products can be assured ?
A: Our machines are all have CE certificate by SGS, TUV.
Q5: If we show you our layout of factory, can you help us to design the whole process line?
A : Yes, our experienced engineers and technical employees can help you to arrange the layout and installation of whole process line based on your real situation;
Q6: If we have samples of new products, can you help us to analysis and design the machine?
A: Yes, Our technical department can help you to analysis, design and test the new products you offered.
Zhengzhou Jinghua Industry Co.,Ltd.
Add:Guanggu Road, Xingyang City,Henan Province,China
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}